Answers to the questions that come up once you have wet wood and a project in mind. Each guide is built on USDA Forest Products Laboratory and MU Extension research, applied to Missouri conditions.
The guides
- Kiln-dried vs air-dried: what a kiln actually changes in the wood, and when air-dried is fine.
- Using a moisture meter on thick stock: pin depth, corrections, and checking your meter against an oven-dry sample.
- Case hardening, honeycomb and checks: how drying stress causes each defect, and how to test for it.
- Is barn-dried lumber dry enough?: why years in a barn still leave wood too wet for furniture.
- Solar vs dehumidification vs vacuum kilns: how each type works, how fast, and who it suits.
- Stickers: thickness, spacing and stain: the numbers behind a flat, clean stack.
- Board feet for a drying load: counting boards, slabs, beams and whole stacks.
- Do you need kiln-dried wood for a mantel?: what drying can and can't do for a shelf or a beam.
Reference pages
For the core numbers, see drying times, moisture content targets, air drying lumber, drying thick slabs, drying by species and lumber sterilization.
Join the Waitlist
When you're ready for a kiln, tell us what you've got.