Custom lumber kilns in the US that post their prices charge about $1 to $2 per board foot for boards up to 2 inches thick, with a minimum charge of $100 to $150. Stock thicker than 2 inches is often billed by the day or week it spends in the kiln, so a thick slab can cost several times what a board does. One kiln posts $1 a board foot, with a $100 minimum, for heat treatment alone.
Those figures come from rates other kilns post. Our kiln near Columbia isn't built yet, so we don't have a price of our own to show you.
Rate table
Posted rates at other US kilns, not our price. Checked November 2026.
| Service | Posted rate |
|---|---|
| Dehumidification kiln, most species and thicknesses | $0.95 per board foot, $100 minimum |
| Vacuum kiln, flat rate, stock up to 1¼ in thick | $1.05 per board foot |
| Vacuum kiln, flat rate, stock 1½ to 2 in thick | $2.10 per board foot |
| Vacuum kiln, stock over 2 in thick | $0.15 per board foot per day in the kiln |
| Vacuum kiln, billed by time | $1.00 per board foot per week, $150 minimum per load |
| Sterilization only | $1.00 per board foot, $100 minimum |
| Stickering and stacking your lumber | $75 per hour |
| Air drying, storage and stickering before the kiln | $100 per month per 1,000 board feet |
What moves the price: thickness, how wet the wood is going in, species (white oak is the slowest common hardwood), how much of the kiln your load fills, whether you sticker it yourself, and whether you need sterilization.
Per board foot vs per week vs per load
Kilns bill three ways, and the same stack can cost very different amounts under each.
Flat per board foot. You pay one rate for each board foot, however long it takes. This is the simplest to plan around, and it's how most of the kilns in our table price ordinary 4/4 to 8/4 lumber. The kiln carries the risk of a slow load.
By time in the kiln. You pay per board foot per day or per week. This is common for thick slabs and beams, where nobody can promise how long the core will take. You carry the risk: a 12/4 white oak slab that needs an extra two weeks costs you two more weeks.
Per load. A kiln may set a minimum per load, or price a full chamber for one customer's run. This suits a sawyer filling the kiln with one species; it's expensive for a hobbyist with 80 board feet.
A worked example: 300 board feet of air-dried 8/4 walnut.
- At $0.95 per board foot flat: 300 × $0.95 = $285.
- At $2.10 per board foot flat (the 1½ to 2 in tier): 300 × $2.10 = $630.
- At $1.00 per board foot per week, if the load takes two weeks: 300 × $1.00 × 2 = $600.
Same wood, more than double the price, depending on the kiln and how it bills. Ask any kiln which method it uses before you haul a load there.
Why thick stock costs more
Drying time grows much faster than thickness. Moisture in the middle of a thick board has farther to go to reach a face, and thick wood also has to be dried at a gentler pace. The USDA Forest Products Laboratory's drying manual uses these factors, with 4/4 lumber as 1.00: 8/4 takes 2.5 times as long, 10/4 takes 3.38 times and 12/4 takes 4.38 times (Drying Hardwood Lumber, FPL-GTR-118).
Under per-day billing that adds up quickly. The same manual lists about 5 days as the minimum to kiln-dry air-dried 4/4 white oak in a well-run commercial kiln, and adds that actual drying runs at least a quarter longer than its minimums. If a 12/4 load spent as long in a per-day kiln as FPL's conventional-kiln figures suggest (5 days × 4.38, plus the 25 percent FPL says real loads add, about 27 days), $0.15 a day would come to about $4.05 a board foot. Vacuum kilns, the ones that post per-day rates, usually dry faster than that, so treat it as a ceiling rather than a typical bill.
Thick stock also carries more risk. Slabs and beams check and honeycomb more easily, so kilns run them gently and charge for the extra attention. Our slab drying page explains why.
Green vs air-dried going in
Air-dried wood costs less to kiln-dry, often by a lot. FPL's minimum kiln times for 4/4 lumber show the difference:
| 4/4 species | From air-dried | From green |
|---|---|---|
| White oak | 5 days | 23 days |
| Red oak | 5 days | 21 days |
| Black walnut | 5 days | 11 days |
| Hard (sugar) maple | 5 days | 11 days |
| White or green ash | 4 days | 10 days |
| Soft maple | 4 days | 7 days |
Minimum days to 6 percent moisture content in conventional kilns, before equalizing and conditioning. "Air-dried" means about 20 percent moisture content for most woods and 25 percent for oak and hickory. Source: FPL-GTR-118, Table 7.25.
Under a flat rate, starting wet may not change your bill. Under time-based rates it changes everything: green 4/4 oak needs four to five times the kiln days of air-dried oak. Thick stock magnifies it. By FPL's minimums, 8/4 white oak from green needs about 23 × 2.5 = 58 days in the kiln, which is why it pays to air-dry thick stock first.
The cheapest drying is the drying you do in your own yard first. Our air drying guide shows how.
Minimums, stickering and handling fees
Minimum charges. Posted minimums run about $100 to $150. At $0.95 a board foot, you need about 105 board feet to clear a $100 minimum. If you have less, split a load with someone drying the same species and thickness.
Stickering. If you show up with a solid-stacked pile, someone has to sticker it before it goes in. One kiln posts $75 an hour for that. Arrive with your wood already stickered and that fee doesn't apply.
Storage and handling. One kiln in our table will hold and air-dry your wood until there's room, for a monthly fee. Another charges monthly storage for dried wood that isn't picked up.
Is it worth it: drying cost vs lost lumber
Usually, for anything you'd build furniture from. The cost of drying is easy to see; the cost of drying badly is hidden in boards you throw away.
FPL's manual cites a study of 4/4 and 5/4 lumber air-dried in typical open yards in Pennsylvania. The lumber lost value while drying: 15 percent for white oak, 14 percent for hard maple, 13 percent for red oak and 8 percent for basswood, from checks, stain and grade loss, not counting shrinkage (FPL-GTR-118, Table 4.1).
Put that in dollars with your own wood. At a 14 percent loss, boards worth $5 a board foot lose about 70 cents of value each; boards worth $10 lose $1.40. Against that, a dollar or two per board foot to finish the job under control is often the cheaper path, and the wood comes out free of insects and dry enough to build with.
It's less clear-cut for low-value lumber headed for barns and fences. For garages, barns and other unheated buildings, MU Extension's air-drying guide calls 15 to 20 percent good enough (G5550), and air drying gets you there for free.
Not sure what you have? See drying times for how long each step takes, or our guide to board feet for a drying load.
Cost estimator
Enter your board feet, thickness and how dry the wood is now. The estimator shows a typical cost range at US kilns, using the posted rates above.
Join the Waitlist
Put your board feet and thicknesses on the waitlist form. It's how we'll size the kiln and set rates that make sense for wood from mid-Missouri.
Typical cost at US kilns
Based on rates other US kilns post, not our price.
Not sure? Count your board feet
Rates other kilns post, November 2026. Species, defects, stickering and storage can change the price. Our own rates post when the kiln opens.
Join the Waitlist