COLUMBIA
KILN DRYING
Join the Waitlist

Status · November 15, 2026: planned, not installed. We are not accepting wood.

Who's Behind the Kiln

We're planning a lumber kiln, and it isn't built yet. We run a working sawmill near Columbia, Missouri, and the kiln will dry other people's boards and slabs. Until it's built, we're collecting the waitlist and sharing what we know about drying wood here.

The mill behind the kiln

Running a sawmill means living with wet wood. Every log that comes off the saw turns into boards and slabs that need months or years before anyone can build with them, and air drying in Missouri only gets them partway. Drying is also where a lot of good lumber gets lost, to checks, stain and insects.

Why a kiln

Because air drying stops short. MU Extension's figures for this state are 12 to 14 percent moisture content for air-dried lumber and 6 to 10 percent for wood in use indoors (G5507). Closing that gap takes controlled heat, and there's a lot of good hardwood in mid-Missouri that needs it: boards from small sawmills, slabs from yard trees, lumber people had sawn years ago and still can't use.

How the waitlist shapes the plan

We'd rather build the right kiln once than the wrong one fast. Kilns differ a lot: a dehumidification kiln, a solar kiln and a vacuum kiln suit different species, thicknesses and volumes. So before we buy, we're asking the people who'd use it what they have.

The waitlist form asks for species, thickness, board feet and how often you'd dry. Added up, those answers tell us what size kiln to build, which type, and what a fair rate looks like for wood from this area.

Where we are

The kiln will sit at our mill near Columbia, and that's where wood will be dropped off and picked up.

There's nothing to visit for drying yet. When the kiln opens, the waitlist hears first.

Join the Waitlist

If you've got wood waiting on a kiln, tell us about it. It's the best way to make sure the kiln we build fits it.

Join the Waitlist

HELP SHAPE THE PLANNED KILN

What wood would
you bring?

Share your species, thickness and board feet. We’ll email you before the kiln opens.

Join the Waitlist