COLUMBIA
KILN DRYING
Join the Waitlist

Status · November 15, 2026: planned, not installed. We are not accepting wood.

Get on the Kiln Waitlist

The kiln isn't built yet, so this form doesn't book anything. It puts you on the list to hear from us first when the kiln opens near Columbia, and it tells us what to build. Two minutes of answers about your wood is the most useful thing you can give us right now.

What happens after you sign up

You see a confirmation after submitting, and we’ll email when there’s news worth sending: a firm opening date, our rates, and how to book a first load.

Your answers are added up, not judged. If fifty people tell us they have 8/4 walnut and white oak, we'll buy a kiln that handles thick hardwood well. If most of the list is 4/4 boards from hobby mills, that's a different machine.

What we'll ask when the kiln opens

Before we schedule a load, we'll want to confirm the details that set drying time and cost:

  • Species and thickness. These decide the schedule. Mixed loads only work when the woods dry at similar rates.
  • Board feet. Our board feet guide shows how to count a stack.
  • Where it's been. How long it was air-dried, under a roof or not, and a meter reading if you have one.
  • Bugs. Any small round holes or fine powder, so we know to plan a full heat treatment.

The kiln will be at our mill near Columbia. Plan on hauling your wood there and picking it up when the load comes out.

Join the Waitlist

Fill in the form below. The more exact your board feet and thicknesses, the better the kiln will fit your wood.

Join the Waitlist

Join the Waitlist

The kiln is planned, not installed. This is an interest list, not a booking.

What you'd dry (choose at least one)
Species
Thickness
Help me estimate board feet

For boards: length (ft) × width (in) × thickness (in) ÷ 12, then multiply by the number of boards.

For a stack: length (ft) × width (ft) × height of wood only (ft) × 12. Exclude the air gaps.

Read the board feet guide (opens a new tab)

HELP SHAPE THE PLANNED KILN

What wood would
you bring?

Share your species, thickness and board feet. We’ll email you before the kiln opens.

Join the Waitlist